Filter
Top Products
5-6 Receiving Faxes Chapter 5
Receiving Using the Distinctive Ring Pattern Detection
Feature: DRPD
Some telephone companies offer a Distinctive Ring Pattern (DRP) service whereby
they assign two or more telephone numbers with distinctive ring patterns to a
single telephone line. If your phone company offers such a service, you can have
both a fax number(s) and a telephone number(s) for your MultiPASS using only
one telephone line.
Your MultiPASS will automatically monitor incoming calls and based on the
distinctive ring pattern, it will determine if the call is from a fax machine trying to
send a document or from a telephone trying to make a voice call.
Use the information in this section to set up the MultiPASS for use with a DRP
service. For more details on the DRP service, contact your local telephone
company. (Your telephone company may have a different name for this service.
Also, this service may not be offered in all areas.)
Types of Ring Patterns
Your telephone company will assign a distinctive ring pattern to each number
when you order the DRP service. The setting you make in the MultiPASS must
match the setting assigned by the telephone company.
You can set the MultiPASS for the following ring patterns:
❑ NORMAL RING
Ring type of normal telephone line (recommended for voice calls)
❑ DOUBLE RING
Two short rings at regular intervals (recommended for fax calls)
❑ SHORT-SHORT-LONG (Triple ring)
Short-short-long at regular intervals
❑ SHORT-LONG-SHORT (Triple ring)
Short-long-short at regular intervals
❑ OTHER RING TYPE
Patterns other than those described above
❑ FAX/TEL AUTO SW