Filter
Top Products
4-4 Sending Faxes Chapter 4
(203 x 196 dpi with halftones) — Suitable for documents that
contain photographs. With this setting, areas of the document
that contain photos are automatically scanned with 64 levels of
gray, rather than just two (black & white). This gives a much
better reproduction of photos, though the transmission time is
longer.
❑ After about 10 seconds, the LCD display returns to standby mode.
Setting the resolution for color sending
1. Press the Color/B&W button to turn on the Color/B&W light.
2. Press Resolution.
❑ The current color resolution setting is displayed.
3. Press Resolution to select the color resolution setting you want.
❑ You can select from the following:
Provides standard color resolution.
Provides a higher quality color resolution.
❑ After about 10 seconds, the LCD display returns to standby mode.
Ex:
FAX STANDARD
FAX STANDARD
FAX FINE
You can change the resolution setting while the document is being scanned for
sending. However, please note that your new setting will only be effective from
the next page scanned.
Color / B&W
Resolution
Resolution
n