Filter
Top Products
Chapter 5 Receiving Faxes 5-7
Receiving Faxes
How DRPD Responds to Calls
When there is an incoming call, the MultiPASS checks the incoming ring pattern
and determines the type of pattern being received. The MultiPASS may require up
to 10 seconds to determine the pattern type. During this time, any telephone
device connected to the MultiPASS reacts according to how you registered the
setting.
Communicating Using the Distinctive Ring Pattern Detection (DRPD
Feature)
Using the MultiPASS with a DRP service is almost the same as using it with a
normal telephone line.
When you turn on DRPD, the receive mode defaults to DRPD.
When someone calls using the number assigned for telephone communication, the
MultiPASS rings in the pattern you registered for telephone calls. When you hear
this pattern, simply pick up the telephone connected to the MultiPASS and talk. If
you do not pick up the telephone, the MultiPASS continues to ring until the other
party hangs up.
When someone sends a fax using the number assigned for fax communication, the
MultiPASS does not ring. It receives the fax automatically.
Your Setting Incoming Call
From Fax
Incoming Call
From Telephone
TEL Rings to alert you to pick up
the handset of the telephone.
Press
Start/Scan to receive
the fax (MANUAL MODE).
Rings to alert you to pick up
the handset of the telephone
and take the call.
FAX Receives the fax without
ringing.
Answers as a fax machine.
FAX/TEL
AUTO SW
Switches to receive mode for
fax transmission signals and
does not ring.
Rings to alert you to pick up
the handset of the telephone
and take the call.