Filter
Top Products
Glossary G-13
Glossary
Remote reception
Activating a fax by answering a telephone or extension phone that is connected to
the MultiPASS, but that is not located near the MultiPASS. You need to dial the
remote receiving ID to start remote reception.
Reports
A document printed by the MultiPASS containing information about the faxes it
has sent or received.
Resolution
The density of dots for any given output device. Expressed in terms of dots per inch
(dpi). Low resolution causes font characters and graphics to have a jagged
appearance. Higher resolution means smoother curves and angles as well as a
better match to traditional typeface designs. Resolution values are represented by
horizontal data and vertical data, for example, 360 x 360 dpi.
Rotary pulse
A telephone dialing system where a dial is rotated to send pulses to the telephone
switching system. When you pulse dial, you hear clicks. When you touch-tone dial,
the most common dialing system, you hear tones.
RX
See Receiving.
S
Scanning contrast
A setting that darkens or lightens the scanning of documents.
Sender ID
Information printed at the top of a fax (also called TTI or Transmit Terminal ID).
This data appears only if the sending fax machine has been programmed with the
information.