Filter
Top Products
Contents
xviii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
2.7.243 TX-LOF 2-141
Clear the TX-LOF Condition 2-141
2.7.244 TX-RAI 2-142
Clear the TX-RAI Condition 2-142
2.7.245 UNEQ-P 2-142
Clear the UNEQ-P Alarm 2-142
2.7.246 UNEQ-V 2-144
Clear the UNEQ-V Alarm 2-144
2.7.247 VCG-DEG 2-144
Clear the VCG-DEG Condition 2-145
2.7.248 VCG-DOWN 2-145
Clear the VCG-DOWN Condition 2-145
2.7.249 VT-SQUELCH-L 2-145
2.7.250 WKSWPR 2-146
Clear the WKSWPR Condition 2-146
2.7.251 WTR 2-146
2.8 DS-1 Line Alarms 2-146
2.9 Traffic Card LED Activity 2-147
2.9.1 Typical Controller Card or Ethernet Card LED Activity After Insertion 2-147
2.9.2 Typical Card LED Activity During Reset 2-147
2.10 Frequently Used Alarm Troubleshooting Procedures 2-147
2.10.1 Protection Switching, Lock Initiation, and Clearing 2-147
Initiate a 1+1 Protection Port Force Switch Command 2-148
Initiate a 1+1 Manual Switch Command 2-148
Clear a 1+1 Force or Manual Switch Command 2-149
Initiate a Lock-On Command 2-149
Initiate a Card or Port Lockout Command 2-150
Clear a Lock-On or Lockout Command 2-150
Initiate an ONS 15310-MA 1:1 Card Switch Command 2-150
Initiate a Force Switch for All Circuits on a Path Protection Span 2-151
Initiate a Manual Switch for All Circuits on a Path Protection Span 2-151
Initiate a Lockout for All Circuits on a Protect Path Protection Span 2-152
Clear an External Switching Command on a Path Protection Span 2-152
2.10.2 CTC Card Resetting and Switching 2-153
Soft- or Hard-Reset an Ethernet or Electrical Card in CTC 2-153
Soft- or Hard-Reset a Controller Card 2-153
2.10.3 Physical Card Reseating and Replacement 2-154
Remove and Reinsert (Reseat) a Card 2-154
Physically Replace a Card 2-154