Filter
Top Products
4-23
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Chapter 4 Error Messages
EID-3214 Could not get number of HOs for line. The number of High Orders (STS/STM) for
the line is not available.
EID-3215 Error in refreshing. Used frequently in pane classes to indicate
a general error condition when trying to
refresh from the model.
EID-3216 Invalid proxy port. Refer to the error message text.
EID-3217 Could not refresh stats. CTC could not refresh statistics values.
EID-3218 Unable to launch automatic node setup. Refer to the error message text.
EID-3219 Unable to refresh automatic node setup information. Failure trying to retrieve automatic node
setup information.
EID-3220 Error refreshing row {0} Error refreshing the specified row.
EID-3222 Could not clear stats. Refer to the error message text.
EID-3225 Error while refreshing pane. Used frequently in pane classes to indicate
a general error condition when trying to
refresh from the model.
EID-3226 {0} termination(s) could not be deleted. {1} Refer to the error message text.
EID-3227 Unable to record a baseline, performance metrics will remain
unchanged.
CTC failed to set the baseline values while
provisioning NE. Previous values remain
unchanged.
EID-3228 {0} termination(s) could not be created.
{1}
Refer to the error message text.
EID-3229 RIP is active on the LAN. Please disable RIP before enabling
OSPF.
Turn off the Routing Information Protocol
(RIP) on the LAN, before enabling OSPF.
EID-3230 OSPF is active on the LAN. Please disable OSPF before
enabling RIP.
Turn off the OSPF on the LAN before
enabling RIP.
EID-3231 Error in Set OPR An error was encountered while attempting
to provision the optical power received
(OPR).
WID-3232 Cannot transition port state indirectly because the port is still
providing services: if the port state should be changed, edit it
directly via port provisioning.
Edit the port state while provisioning the
port.
EID-3233 Current loopback provisioning does not allow this state
transition.
Refer to the error message text.
EID-3234 Current synchronization provisioning does not allow this state
transition
You cannot transition the port state to the
target date while in the current
synchonization state.
EID-3235 Cannot perform requested state transition on this software
version.
Refer to the error message text.
EID-3236 Database Restore failed. {0} CTC failed to restore the specified
database.
Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message Description