Filter
Top Products
4-21
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Chapter 4 Error Messages
EID-3144 Max number of static routes exceeded. The number of static routes has exceeded its
limit.
EID-3145 RIP Metric is not in the range 1-15. The Routing Information Protocol (RIP)
metric should be in the range of 1 to 15.
EID-3146 Invalid RIP Metric Refer to the error message text.
EID-3147 Error creating summary address. There was an error while creating the
summary address.
EID-3148 No Layer 2 domain has been provisioned. You must provision any one of the layer 2
domain.
EID-3149 Unable to retrieve MAC addresses. Refer to the error message text.
EID-3150 The target file {0} is not a normal file. The specified target file is not a normal file.
EID-3151 The target file {0} is not writeable. The target file is not writeable. Specify
another file.
EID-3152 Error creating Protection Group CTC encountered an error creating
Protection Group.
EID-3153 Cannot delete card, it is in use. Refer to the error message text.
EID-3154 Cannot {0} card, provisioning error. CTC cannot perform the task on the card.
EID-3155 Error Building Menu CTC encountered an error building the
menu.
EID-3156 Error on building menu (cards not found for {0} group) CTC encountered an error while building
the menu, as cards could not be found for
the specified group).
EID-3157 Unable to set selected model: unexpected model class {0} CTC encountered an unexpected model
class while trying to complete the task.
EID-3158 Unable to switch, a similar or higher priority condition exists
on peer or far-end card.
Refer to the error message text.
EID-3159
1
Error applying operation. CTC encountered an error while applying
this operation.
EID-3160 {0} error encountered. CTC encountered the specified error.
EID-3161 Ring Upgrade Error An error was encountered while attempting
to upgrade the BLSR. Refer to the details
portion of the error dialog box for more
information.
EID-3162 This protection operation cannot be set because the protection
operation on the other side has been changed but not yet
applied.
Refer to the error message text.
EID-3163 Cannot validate data for row {0} CTC cannot validate the data for the
specified row.
EID-3164 New Node ID ({0}) for Ring ID {1} duplicates ID of node {2} The new specified node ID for the specified
ring ID is the same as another node ID.
Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message Description