Filter
Top Products
4-29
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Chapter 4 Error Messages
EID-3353 There is no such interface available. The interface specified is not present in
CTC.
EID-3354 Specified endpoint is in use. Select another endpoint that is not in use.
EID-3355 Specified endpoint is incompatible. Refer to the error message text.
EID-3357 Unable to calculate connections. Refer to the error message text.
EID-3358 Optical link model does not exist for specified interface. Create an optical linkmodel for the
interface, and proceed.
EID-3359 Unable to set optical parameters for the node. Refer to the error message text.
EID-3361 Ring termination is in use. Error deleting ring termination You cannot delete a ring in use.
EID-3362 Error deleting ring termination. There was an error while deleting ring
termination.
EID-3363 No ring terminations selected. You must select a ring termination.
EID-3364 Error creating ring ID. There was an error while creating the ring
ID.
EID-3365 OSC termination is in use. Select another optical service channel
(OSC) which is not in use.
EID-3366 Unable to delete OSC termination. There was an error deleting the OSC
termination.
EID-3370 No optical link has been selected You must select an optical link.
EID-3371 Error while calculating automatic optical link list. Refer to the error message text.
EID-3372 Attempt to access an OCHNC connection that has been
destroyed.
CTC destroyed an external attempt to
access an optical channel network
connection.
EID-3375 Expected span loss must be set. Refer to the error message text.
EID-3376 Unable to retrieve measured span loss. Refer to the error message text.
EID-3377 Wrong interface used. The interface used for the card is wrong.
EID-3378 Duplicate origination patchcord identifier. The provisionable patchcord identifier to
the patchcord you are attempting to
provision is already in use by another
patchcord on the origination node.
EID-3379 Duplicate termination patchcord identifier. The provisionable patchcord identifier to
the patchcord you are attempting to
provision is already in use by another
patchcord on the remote node.
EID-3380 Unable to locate host. Refer to the error message text.
EID-3381 Maximum Frame size must be between {0} and {1} and may be
increased in increments of {2}.
The frame size must be in the specified
range. This can incremented by the
specified value.
EID-3382 Number of credits must be between {0} and {1}. The number of credits must be between the
specified values.
Table 4-1 Error Messages (continued)
Error Warning
ID Error Warning Message Description