Filter
Top Products
3-25
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
4. Remove the 1.44-MB diskette drive (floppy drive) to access the screw
which secures the removable media tray. See the “Replacing the
1.44-MB Diskette Drive” procedure above for details.
5.
Remove the screw that secures the CD-ROM tray assembly to the
chassis. Slide the CD-ROM tray forward out of the server. The
CD-ROM tray and the CD-ROM drive adapter board disconnect.
CD-ROM cabling remains attached to the CD-ROM adapter board.
6.
Remove the T-15 torx screw securing the removable media tray to the
chassis and slide the tray out of the server.
Figure 3-26. Removing the removable media tray from the server
7. Configure the SCSI ID of the drive as shown with your options
instructions.
8.
Attach the 3.5-inch drive to the 5.25-inch bracket with the screws
provided with your option.