Filter
Top Products
2-33
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: C-CH02.DOC Last Saved On: 1/12/99 2:50 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Figure 2-26. Securing cables to the cable management arm
4. Extend the bundled cables down the rack’s cable channel.
Before loading additional components, be sure the server is secured to the rack
using the front bezel thumbscrews.
Powering Up the Server
After the cables have been connected to the server, you are ready to power on
the server.
WARNING: To reduce the risk of electric shock or damage to the
equipment:
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical
outlet that is easily accessible at all times.
To disconnect power to the equipment, unplug the power
cord from each power supply.
NOTE: Do not place anything on power cords or cables. Arrange them so that
no one may accidentally step on or trip over them. Do not pull on a cord or
cable. When unplugging from the electrical outlet, grasp the cord by the plug.