Filter
Top Products
3-12 Installing Hardware Options
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Installing an Expansion Board
To install an expansion board, refer to the following installation Procedure.
WARNING: To reduce the risk of personal injury, be careful
when installing and removing expansion boards. The cover
retaining clasps can pinch or cut your fingers. Do not attempt to
force boards in or out of position.
1. If the server is on, shut down the operating system, place it in Standby
and disconnect the power cord (s). See Chapter 2, “Server Installation
Overview.”
2.
Slide the server out from the rack.
3.
Remove the server cover.
4.
Press the top of the expansion slot latch and open the latch toward the
rear
of the expansion slot cage.
1
2
Figure 3-11. Opening the expansion slot latch
5. Remove the expansion slot cover .