Filter
Top Products
5-5
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: F-CH05.DOC Last Saved On: 12/16/98 10:52 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Most ISA Plug and Play boards allow the board to be set to one of two modes.
The modes are most commonly referred to as “Plug and Play” and “Legacy”
mode. If a board is set to “Legacy" mode, usually through a jumper setting on
the board, or through configuration software that ships with the board, then the
board is treated as though it was a normal ISA board. If adding an ISA Plug and
Play board which is set to “Legacy” mode, then you must use “Step 2: Add or
Remove Boards” to add the board to the system configuration.
3. View or Edit Details
This step displays an overview of current configuration settings and installed
hardware. From this screen, you can change your hardware resource settings
and many other items, including: security features, ASR, IRC, and boot order.
4. Examine Required Switches
This step displays the required switch and jumper settings for most ISA boards.
Find the appropriate board’s switch and jumper settings and adjust them to
match the settings displayed on the screen.
5. Save and Exit
Use this step to save the configuration update when you have made changes.
Drive Array Configuration
This option runs the Compaq Array Configuration Utility. This Utility allows
you to view and make changes to a Compaq SMART-2 Array Controller’s
Configuration.