Filter
Top Products
5-16 Server Configuration and Utilities
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: F-CH05.DOC Last Saved On: 12/16/98 10:52 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
The third method would be very similar to the “Manual Path” listed
above however you run the Compaq’s System Configuration Utility to
configure the system, obtain the appropriate EFS for the SCO operating
system release and follow the manufacturer’s installation instructions.
Once again, depending on the operating system, it may be necessary to
use the Compaq Boot Time Loadable Drivers (BTLD) diskette or the
Compaq Host Bus Adapters (HBA) diskette along with the Compaq
Extended Feature Supplement (EFS) diskette to install all the driver
support. These can be downloaded onto floppies with tools available on
the Compaq SmartStart and Support Software CD. To create these
floppies, boot the Compaq SmartStart and Support Software CD and
follow the instructions to create Supplemental Support Software
diskettes. One of the diskettes on the Compaq EFS contains a bootable
documentation diskette. Before attempting to install the SCO UNIX
software, boot this diskette and read the README file for the Compaq
EFS. It will instruct you on how to use the BTLD or HBA diskettes
along with the SCO installation media.
Compaq specific drivers either included with the EFS or packaged with SCO’s
media include:
Compaq Ethernet/Token Ring Adapter
Automatic Server Recovery-2
Compaq System Health
Compaq ProLiant Storage System
Compaq SCSI and Intelligent Disk Array
Compaq Fiber Storage Array Support
Compaq Remote Insight Board Support
Compaq System Utilities
Special Considerations
Please check the “README" files on the Compaq SmartStart or EFS Diskettes
or CDs for additional details.