Filter
Top Products
E-1
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Switches and Jumpers Comments: 333172-002
File Name: L-appe.doc Last Saved On: 12/14/98 4:21 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Appendix E
Switches and Jumpers
When you add or remove a component or change a security feature, you must
reconfigure the computer to recognize these changes. If the system
configuration is incorrect, your computer may not work properly and you may
receive error messages on the screen. Setting the System Board switches is part
of the reconfiguration process, along with running the System Configuration
utility.
Setting System Board Switches
The Compaq ProLiant 1850R System Board has two switch banks (1 and 2)
located on the System Board that are used to set the overall configuration of
your server.
Configuration (SW1) Switch is an 6-position switch
(S1-S6) provides processor switch settings of your server.
Processor (SW2) Switch 2 is a 6-position switch is used for system
configuration.
Refer to the hood labels on the inside of the server cover or to the tables below
for the proper settings.