Filter
Top Products
2-22 Server Installation Overview
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: C-CH02.DOC Last Saved On: 1/12/99 2:50 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
1. Position the cage nut as shown in the following figure, on the inside of
the rail.
2.
Hook one of the lips of the cage nut through the square rail perforation.
3.
Insert the tip of the fitting tool through the other side of the perforation
and hook the opposite lip of the cage nut.
Figure 2-11. Inserting cage nuts
4. Using the fitting tool as a lever, pry the cage nut into position.
5.
Repeat for each cage nut.
Attaching the Rack Mounting Bracket
Assembly to the Rack
The tabs on the front of the rack mounting bracket help to align it with the front
of the rack frame. Cage nuts are not used for the front attachment of the rack
mounting bracket.
1.
Attach a rack mounting bracket assembly to the front of the rack first,
using one M6 x 1.0-12L Phillips screw in the bottom hole of the bracket.
Do not use washers.