Filter
Top Products
C-2 Power Cord Set Requirements
Writer: Michele Wray Project: Compaq ProLaint 1850R Setup and Installation Guide Comments: 333172-002
File Name: J-appc.doc Last Saved On: 12/14/98 10:50 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Country-Specific Requirements
Use the following table to identify the appropriate accredited agency in
your country.
Table C-1
Power Cord Set Requirements - By Country
Countr
y
A
ccredited A
g
enc
y
A
pplicable Note Numbers
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
China CCEE 1
Denmark DEMKO 1
Finland SETI 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
Norway NEMKO 1
Singapore PBS or PUB 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
Notes:
1. Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
2
conductor size. Power cord set fittings (appliance coupler and wall plug) must
bear the certification mark of the agency responsible for evaluation in the country
where it will be used.
2. Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall
plug must be a two-pole grounding type with a NEMA 5-15P (15A, 125V).
3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law. Flexible cord
must be Type VCT or VCTF, 3-conductor, 1.0 mm
2
conductor size. Wall plug must
be a two-pole grounding type with a Japanese Industrial Standard C8303 (7A,
125V) configuration.