Filter
Top Products
3-17
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SCSI ID Settings for Compaq Hard Drives
The following chart provides the SCSI ID jumper settings for
Compaq SCSI hard drives.
Table 3-4
SCSI ID Settings
SCSI ID Bit 2 Bit 1 Bit 0
6 ONONOFF
5ONOFFON
4ONOFFOFF
3 OFF ON ON
2 OFF ON OFF
1OFFOFFON
0 OFF OFF OFF
Installing ProLiant 1850R Mass Storage
Devices
There are three or four drive bays for internal mass storage devices in the
ProLiant 1850R server. SCSI devices can be installed in drive bays A or B or
attached to the external Wide-Ultra SCSI-3 port via an external storage system.
Drive bays A and B are 5.25-inch wide x 1.6-inch height drive bays (removable
media areas).
CAUTION: The ProLiant 1850R server does not support the
installation of IDE or EIDE fixed disk drives.