Filter
Top Products
D-3
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: K-appd.doc Last Saved On: 12/14/98 10:50 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
6. Remove the backing from the adhesive on the hook-and-loop fastener
strip.
7.
Place the battery and the hook-and-loop fastener strip on the designated
chip, as shown in the following illustration.
8.
Plug the battery connector onto pins 1-4 of header E2 on the System
Board.
Figure D-2. Attaching the battery to the designated location
9. Reverse steps 1 through 3 to replace the server cover and cable the
server, etc.
10.
Place the sticker included with your battery kit on the back of your server
above the power connector.