Filter
Top Products
2-3
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: C-CH02.DOC Last Saved On: 1/12/99 2:50 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Rack Warnings and Precautions
Before beginning these procedures, make sure you understand the following
warnings and caution:
WARNING: To reduce the risk of personal injury, always ensure
that the rack is adequately stabilized before extending a
component outside the rack. A rack may become unstable if more
than one component is extended for any reason. Extend only one
component at a time.
WARNING: To reduce the risk of personal injury or damage to the
equipment, be sure that:
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizers are attached to the rack if it is a single rack
installation.
The racks are coupled together in multiple rack installations.
WARNING: To reduce the risk of personal injury or damage to the
equipment, at least two people are needed to safely unload the
rack from the pallet. An empty 42U rack weighs 253 lb (115 kg),
is over seven ft (2.1m) tall, and may become unstable when being
moved on its casters. Do not stand in front of the rack as it rolls
down the ramp from the pallet, but handle it from the sides.
WARNING: A rack may become unstable if more than one
component is extended for any reason. To reduce the risk of
personal injury, always ensure that the rack is adequately
stabilized before extending a component outside the rack, and
extend only one component at a time.