Filter
Top Products
4-13
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: E-ch04.doc Last Saved On: 12/16/98 10:48 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Internal Cabling
Table 4-4
Internal Cabling for the Compaq ProLiant 1850R
Compaq ProLiant
1850R
Wide-Ultra SCSI-3
and Fast-Wide SCSI-
2 Hot-Plug Hard
Drives
Fast SCSI-2 Non Hot-
Plug
Hard Drives
4/8 DAT Drive, 4/8 SLR
Drive, 12/24 DAT Drive,
15/30 DLT Drive,
20/40GB DLT Drive,
35/70 DLT Drive, and
SCSI
CD-ROM Drive
Wide Ultra2 SCSI Hot-
Plug Hard Drives
Dual Channel
Wide-Ultra SCSI-3
Controller (Integrated)
SCSI Port 1 or 2
No additional cables
required. Use the
Wide SCSI pt to pt
cable, P/N
296016-003, to
connect SCSI Port 1
to the hot plug back
plane.
68 to 50 pin adapter
required. Order option
kit PN 212055-001.
No additional cables
required. Connect the
two device cable, P/N
296016-004, from
SCSI Port 2 to the
device.
No additional cables
required. Connect the
two-device cable, P/N
296016-004, from SCSI
Port 2 to the device. Use
the 68-50 SCSI Adapter
Use the Option Kit, P/N
212055-001, if
necessary.
No additional cables
required. Use the Wide
SCSI pt to pt cable, P/N
296016-003, to connect
SCSI Port 1 to the Wide
Ultra2 hot plug back
plane.
Compaq Wide-Ultra
Controller (PCI), or
Dual Channel
Wide-Ultra SCSI-3
Controller
SEE NOTE 1
No additional cables
required. Use the
Wide SCSI pt to pt
cable, P/N
296016-003, to
connect from the
controller to the hot
plug back plane.
68 to 50 pin adapter
required. Order option
kit PN 212055-001.
No additional cables
required. Connect the
two device cable, P/N
296016-004, from the
controller to the
device.
No additional cables
required. Connect the
two device cable, P/N
296016-004, from Port
2 to the device. Use the
internal 68-50 SCSI
Adapter, P/N
212055-001, if
necessary.
Compaq 64-bit Dual
Channel Wide Ultra2
SCSI Controller, Smart
Array 3200 Controller,
Smart Array 221
Controller
No additional cables
required. Use the Wide
SCSI pt to pt cable, P/N
296016-003, to connect
from the controller to the
Wide Ultra2 hot plug
back plane.