Filter
Top Products
5-20 Server Configuration and Utilities
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: F-CH05.DOC Last Saved On: 12/16/98 10:52 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
These drivers are located on the Compaq SmartStart and Support Software CD
you received with your server. You can use SmartStart to create a Banyan
VINES Support Software Diskette (SSD) from Compaq to support a manual
installation of Banyan VINES. There are two types of SSDs:
LAN Adapter SSD
Peripheral Adapter SSD
These SSDs contain the README files that list available drivers and driver
installation procedures.
These drivers can also be ordered through SoftPaq and can be downloaded from
the Compaq Web site.
Manual installation
1. Insert the Compaq SmartStart and Support Software CD into the drive.
2.
Boot your system.
3.
Select Manual Installation.
4.
Follow the instructions that display on the monitor.
Diagnostics and Other Utilities
When you select the Diagnostics and Utilities feature from the System
Configuration Utility main menu, the utility provides prompts to test,
inspect, upgrade, and diagnose the server.
Diagnostics and Utilities are located on the system partition on the hard
drive and must be accessed when a system configuration error is detected
during the Power-On Self-Test (POST).
Run the Inspect Utility after the computer has been configured to get
information about the operating system environment.
For instructions on using the Diagnostics Utility and other Compaq
utilities, refer to the online section on Diagnostics Tools.