Filter
Top Products
4-17
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: E-ch04.doc Last Saved On: 12/16/98 10:48 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
ProLiant 1850R Cabling Examples
The following examples illustrate cabling scenarios associated with a
ProLiant 1850R server. They are provided as only an overview for installing and
routing some of the cabling scenarios described in the SCSI Cable Usage
Matrix. You may also want to refer to the hood labels attached to the inside of
the server cover. If you have any problems, contact your local Compaq
Authorized Reseller or Service Provider.
Connecting an Array Controller to the
Hot-Plug Drive Cage Backplane Board
Disconnect the point-to-point SCSI cable from the system board and attach it to
the Array Controller to connect the Controller to the hot-plug drive cage.
Figure 4-8. Example of a point-to-point cable from the array controller to the
hot-plug drive cage