Filter
Top Products
3-29
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
6. Push the server into the rack and secure it.
7.
Reconnect the power cord and power on the server.
8.
Reconfigure the server. See to Chapter 5, “Using the System
Configuration Utility,” for more information.
Installing a Full-Height Device
(DLT Tape Drive)
To install a full-height device into the removable media bay area:
1.
Remove both removable media trays in bay areas A and B. See the
“Installing a 3.5-inch Drive into a 5.25-inch Drive Bay” procedure above
and follow steps 1 through 6.
2.
Remove the two T-15 torx screw securing the media trays to the chassis
and slide the trays out of the server.
Figure 3-32. Removing the two removable media trays from the removable
media cage
3. Insert the DLT tape drive into the removable media bay area and secure
from the bottom of the unit with four T-7 Torx screws.