Filter
Top Products
3-15
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
3. Remove all expansion boards by reversing the steps in the “Installing an
Expansion Board” procedure.
4.
Loosen the two captive screws securing the riser board brace.
5.
Lift the riser board and riser board brace out of the server as shown
below.
2
1
Figure 3-15. Removing the riser board and riser board brace
6. Install the new riser board and riser board brace assembly. When
installing this assembly, refer to figure 3-15 for proper alignment.
2
1
Figure 3-16. Installing the riser board and riser board brace
7. Replace all expansion boards.