Filter
Top Products
5-6 Server Configuration and Utilities
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: F-CH05.DOC Last Saved On: 12/16/98 10:52 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Setting Power-On Defaults
You can set and change the Power-On features at any time.
1.
Select System Configuration from the Main Menu; then select
Power-On Defaults.
2.
Set the current date in the format:
MM-DD-YYYY
3.
Set the correct time in the format:
HH:MM:SS
4.
Set the Power-On Num Lock state:
( ) OFF
(*) ON
* This activates the numeric keypad when the computer is turned ON.
System Partition
The System Partition option allows you to copy and delete configuration
files, and create, upgrade, or delete a system partition on the hard drive
for the utilities.
The following menu options are available:
Create System Partition
Upgrade System Partition
Delete System Partition
Copy Files
Delete Files
Creating a New System Partition
If you used SmartStart to configure your server, the new System Partition is
created automatically. If SmartStart was not used for server configuration
follow the procedure below to create one now: