Filter
Top Products
5-19
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: F-CH05.DOC Last Saved On: 12/16/98 10:52 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Retail Installation
You cannot install OS/2 on a Compaq server using unmodified installation
diskettes that come with the OS/2 retail CD follow the procedure given below:
1.
Punch out OS/2 SSD diskettes from the Compaq SmartStart and Support
Software CD as per the procedure given in the "Manual Installation"
section.
2.
Use the CPQSETUP utility available on these diskettes to modify your
OS/2 installation diskettes.
3.
Install OS/2 using the diskettes modified in step 2.
4.
Go to step 9 of the "Manual Installation" section.
SunSolaris Device Drivers from Compaq
Your server must have certain device drivers for some server options to operate
using the Solaris ( Intel Platforms) operating system. Compaq provides driver
support for Solaris 2.5.1, 2.6 and above.
These drivers and Installation procedures are located at SunSoft website
http:/access1.sun.com.drivers/.
Banyan Vines Device Drivers from Compaq
If using the Compaq Integrated Netelligent 10/100 TX Controller on a
ProLiant 1850R server and you do not plan to use the SmartStart
installation process to setup your server, you must install updated support
software for your controller to connect properly to the network, refer to
Appendix G, “Updating LAN Drivers” for instructions.
Your server must have certain device drivers for some server options to operate
using the Banyan VINES operating system. Compaq provides driver support for
Banyan VINES 6.x, 7x, and 8.x.