Filter
Top Products
G-9
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: N-appg.doc Last Saved On: 12/16/98 11:01 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
3. Insert the LAT SSD installation diskette and press Enter. The following
message is displayed if the Vines server version is less 6.40(0):
"NOTE: Compaq Netelligent 4/16 TR
UTP/STP controller driver is supported
only on VINES 6.40(0) and above.
Upgrade your system to VINES 6.40(0)or
above to install this driver."
4.
Installation of LAT SSD continues and following message is displayed:
"Kernel should be rebuilt now to add
NetFlex-3 Supplement driver. The
NetFlex-3 driver will not work without
this. Do you want to build the Kernel
now - Y/N (default Y) :"
NOTE: The rebuilding of the Kernel can be skipped if the user does not wish to
Install the NetFlex-3 driver.
5.
Press Y or Enter to rebuild the Kernel or press N to skip Kernel rebuilding
process. The Install/Remove driver menu is displayed after the completion
of this step.
6.
Select INSTALL a driver and press Return. From the driver list
displayed, select the driver you want to install and press Return. Save the
configuration and exit. The following message is displayed:
"The additional drivers are now being
installed.
Please wait ..."
7.
The BANYAN Server Configuration screen comes up. Select Add
Cards/Change Card Configuration. The Add/Change Card screen is
displayed.
8.
Select Add a card. From the list of controllers displayed.
9.
Select the Compaq Network Adapter which exists on your system.
10.
Change the Slot Number to match the slot that the controller occupies, or
for an integrated controller specify any slot number that does not contain a
network controller.