Filter
Top Products
2-24 Server Installation Overview
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: C-CH02.DOC Last Saved On: 1/12/99 2:50 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
3. Secure the back end of the mounting bracket assembly to the back corner
brace of the rack with one M6 x 1.0-12L Phillips screw through the
bottom hole of the bracket and the cage nut, as shown in the following
figure.
Figure 2-14. Attaching the back of mounting bracket assembly to the rack (left view)
IMPORTANT: The screw holes on rear of the brackets are oval holes.
Figure 2-15. Attaching the back of mounting bracket assembly to the rack (right view)
4. After attaching both of the mounting bracket assemblies to the rack,
prepare the server for mounting in the rack.