Filter
Top Products
G-3
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: N-appg.doc Last Saved On: 12/16/98 11:01 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Setup intraNetWare for Small Business
from Compaq
Perform the steps below before installing IntraNetWare for Small Business from
Compaq.
1.
Copy the entire CD source (about 590 megabytes) onto a directory on the
systems local hard drive, maintaining directory structure.
2.
After copying, delete or rename the following files: CPQNF3.LAN,
MSM.NLM, NBI.NLM, and ETHERTSM.NLM. These files are located
under (local drive letter) :\
PRODUCTS\NW411\IBM\411\LANDRV in
the intraNetWare For Small Business directory structure.
3.
Copy the same deleted or renamed files in step 2 from the SmartStart and
Support Software CD (CD Drive letter)
:\
CPQSUPSW\NSSD\NETWORK or, from the support diskette #3
A:\NETWORK back to the local hard drive“(Drive
letter):
\PRODUCTS\NW411\IBM\411\LANDRV directory.
4.
Install your Operating System.
NOTE: This directory containing the CD source may be deleted after completing the
installation. LAN Driver Update procedure For intraNetWare for Small Business from
Compaq.
Follow the procedure below to update the LAN Driver for the IntraNetWare for
Small Business from Compaq Operating System. If the LAN driver does not
load, the following warning and window will be displayed sequentially.
WARNING: You do not have a LAN driver loaded. You need to
load the proper LAN driver to complete the installation.
Then the following window displays: Select an action. From this window you
then need to follow the steps listed below.
1.
Scroll to option Select additional drivers (recommended) and press
Enter.
2.
Press Insert to bring up the screen to select an additional driver.
3.
Press F3 to specify a different path. A path dialog box appears.