Compaq 1850R Server User Manual


 
G-10 Updating LAN Drivers
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: N-appg.doc Last Saved On: 12/16/98 11:01 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
11. Save the configuration and exit. The following message is displayed:
"Building device drivers, please wait
......."
12.
The Banyan Server Configuration screen is displayed. Select Return to
the System Maintenance Menu.
13.
From the System Maintenance menu select Return to the operator menu.
14.
From the operator menu select Shutdown Server Software and reboot
your server.
The server now boots with the Network controller driver configured as part of the
VINES Operating System. This completes the Network controller driver
installation. The controller is now in an operable state.
Installing SunSoft Solaris 2.5.1, 2.6, and
Later Versions (Intel Platforms) LAN Drivers
LAN drivers and installation procedures are located at SunSoft website
http://access1.sun.com.drivers/.