Filter
Top Products
5-17
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: F-CH05.DOC Last Saved On: 12/16/98 10:52 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
IBM OS/2 Device Drivers from Compaq
If using the Compaq Integrated Netelligent 10/100 TX Controller on a
ProLiant 1850R server and you do not plan to use the SmartStart
installation process to setup your server, you must install updated support
software for your controller to connect properly to the network, refer to
Appendix G, “Updating LAN Drivers” for instructions.
Your server must have certain device drivers for some server options to operate
using IBM OS/2 Warp Server 4.0, IBM OS/2 Warp Server Advanced 4.0, IBM
OS/2 Warp Server Advanced 4.0 with SMP , IBM OS/2 Warp 3.0 Connect, and
IBM OS/2 Warp 4.0. These drivers are located on the Compaq SmartStart and
Support Software CD you received with your server. If you use Compaq
SmartStart to install your operating system, these drivers are loaded
automatically.
Otherwise, you can use Compaq SmartStart to create OS/2 Support Software
Diskettes (SSD) from Compaq to support a manual installation or retail software
installation of OS/2. The installation diskettes can be customised for OS
installation on Compaq servers by using the CPQSETUP utility on the OS/2
SSD.
For more information on these drivers, run the VIEWME.EXE file in the root
directory of the OS/2 SSD Diskette 1 from Compaq.