Filter
Top Products
2-28 Server Installation Overview
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: C-CH02.DOC Last Saved On: 1/12/99 2:50 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Figure 2-19. Using thumbscrews to secure the positioned server in the rack
5. Tighten the thumbscrews before you close the rack door to prevent the
door from hitting protruding thumbscrews.
Attaching the Cable
Management Arm
A double-hinged cable management arm with fasteners ship with each server.
The cable management arm attaches to the server's cable management arm
bracket and to the rear frame of the rack. All cables to and from the server are
tied to this arm. The two hinges allow the cable management arm with attached
cables to swing out of the way when you need to access rear connectors or the
hot-plug power supply.
1.
For easier handling, first slide the server into the rack, then attach the
cable management arm to the cable management arm server bracket
using two M6 x 1.0-12L Phillips screws. If you attach the arm before
loading the server in the rack, the arm may swing around and interfere
with the loading process.