Filter
Top Products
3-19
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Replacing the 1.44-MB Diskette Drive (Floppy
Drive)
Removing the 1.44-MB Diskette Drive
(floppy drive)
1. If the server is on, place it in Standby and disconnect the power cord (s).
Refer to Chapter 2, “Server Installation Overview.”
2.
Pull the server forward in the rack to access the inside of the server.
3.
Remove the server cover.
4.
Disconnect the cabling to the 1.44-MB diskette drive.
Figure 3-19. Disconnecting the 1.44-MB diskette drive cabling
5. Remove the T-15 torx screw and slide the diskette drive away from
front bezel until it stops
.