Filter
Top Products
3-16 Installing Hardware Options
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
8. Replace the server cover.
9.
Slide the ProLiant 1850 R server into the rack and secure using the
thumbscrews.
10.
Reconnect all cabling and turn the server on.
11.
Reconfigure the server. See to Chapter 5, “Server Configuration and
Utilities.”
Installing Removable Media Devices
Refer to the General Installation Guidelines below for general rules regarding
drive installation.
General Installation Guidelines
When adding SCSI hard drives to your ProLiant 1850R server, observe the
following guidelines:
A maximum of seven SCSI devices per controller can be added.
Each SCSI drive must have a unique address. SCSI addresses are
automatically set for hot-plug drive cage.
Compaq SCSI cables for the ProLiant 1850R server are terminated. Be
sure to remove all terminating jumpers from third-party SCSI devices.
Supported Compaq SCSI options are not terminated.