Filter
Top Products
2-9
Compaq ProLiant 1850R Setup and Installation Guide
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172-002
File Name: C-CH02.DOC Last Saved On: 1/12/99 2:50 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Set the switches: These switches include: system board switches and
SCSI ID settings, if changes are required. See to Chapter 3, “Installing
Hardware Options.”
Attach rack mounting hardware to the rack and to the server.
Mount the server into the rack.
Attach the cable management arm to the rack.
Connect the cables: These cables include: keyboard, mouse, monitor,
network, and power cables.
Turn on the computer and allow default configuration or insert the
SmartStart and Support Software CD to configure the server. When
the server boots from the SmartStart program, it automatically starts the
System Configuration Utility. For SmartStart and Support Software CD
initialization procedures, refer to the Server Setup and Management pack
shipped with your server. When the utility is completed, you will be
prompted to turn the server off, install any ISA boards (any switch
settings required will be provided by the System Configuration utility),
and then boot the server from the SmartStart program.
Install Compaq Insight Manager to manage the server. For Compaq
Management CD initialization procedures, refer to the Server Setup and
Management pack shipped with your server.
Register your server. For server registration information, refer to the
Server Setup and Management pack shipped with your server.