Filter
Top Products
Overview: Additional Information
10006024-04 Katana®752i User’s Manual
1-5
ADDITIONAL INFORMATION
This section lists the Katana®752i hardware’s regulatory certifications and briefly discusses
the terminology and notation conventions used in this manual. It also lists general technical
references.
Mean time between failures (MTBF) has been calculated at 500,674 hours using Telcordia
SR-232, Issue 1, Reliability Prediction for Electronic Equipment at 40
°C.
Product Certification
The Katana®752i hardware has been tested to comply with various safety, immunity, and
emissions requirements as specified by the Federal Communications Commission (FCC),
Underwriters Laboratories (UL), and others. The following table summarizes this compli-
ance.
Table 1-1: Regulatory Agency Compliance
Type: Specification:
Safety IEC60950/EN60950 – Safety of Information Technology
Equipment (Western Europe)
UL60950, CSA C22.2 No. 60950, Third Edition – Safety of
Information Technology Equipment, including Electrical
Business Equipment (BI-National)
Global IEC – CB Scheme Report IEC 60950, all country deviations
Environmental NEBS: Telecordia GR-63 –
Section 4.1.1 Transportation and Storage Environmental
Criteria;
Section 4.3 Equipment Handling Criteria;
Section 4.4.1 Earthquake Environment and Criteria;
Section 4.4.3 Office Vibration Environment and Criteria;
Section 4.4.4 Transportation Vibration Criteria
Section 4.5 Airborne Contaminants
EMC FCC Part 15, Class A – Title 47, Code of Federal Regulations,
Radio Frequency Devices
ICES 003, Class A – Radiated and Conducted Emissions, Canada
NEBS: Telecordia GR-1089 level 3 – Emissions and Immunity
(circuit pack level testing only)
ETSI EN300386 – Electromagnetic Compatibility and Radio
Spectrum Matters (ERM), Telecommunication Network
Equipment, Electromagnetic Compatibility (EMC) Requirements