Filter
Top Products
Monitor: Environment Variables
10006024-04 Katana®752i User’s Manual
15-27
version
The version command displays the monitor’s current version number.
Definition:
version
ENVIRONMENT VARIABLES
The following table lists the monitor’s standard environment variables. Please note that
holding down the s key during powerup forces the monitor to use the default environment
parameters.
Table 15-4: Standard Environment Variables
Variable: Default Value: Description:
baudrate 9600 Console baud rate.
Valid rates: 9600, 19200, 38400, 57600, 115200
blinkled false Determines if front panel red LED will blink after init
Valid options: true, false
bootcmd undefined Command to be executed after boot. Use a backslash and
semicolon to specifiy more than one item. For example:
setenv bootcmd fpledoff\;bootcrc\;
bootdelay 1 Countdown to bootcmd execute (-1 to disable autoboot)
bootfile " " Path to boot file on server (used with TFTP)
cachedaddr – Address of bootcrc cached image, must be set manually
prior to calling bootcrc
Valid options: any address in soldered Flash
cachedcrc16 – Specifies 16-bit CRC value of bootcrc cached image
Set by bootcrc from newcrc16 (no manual setting required)
Valid options: 16-bit, polynomial 0xA001 crc value
cachedname – Specifies name and path of cached image to TFTP
Set by bootcrc from bootfile when a new image is cached
(no manual setting required)
Valid options: name string of cached image
cachedsize – Specifies size in bytes of bootcrc cached image
Set by bootcrc from newsize (no manual setting required)
Valid options: any byte size that fits in soldered Flash
cachemode write Sets the L1 cache mode to write-through or copy-back.
Valid options: write, copy
chassisid – Specifies the board’s chassis ID (set manually or by call to
CLI command getphysic)
Valid options: 1—16
clearmem on Determines if all of SDRAM is cleared on power-up. This
option is ignored if ECC is enabled.
Valid options: on, off
cpci – Displays status of cPCI bus
(on = accessible, off = held in reset)