Filter
Top Products
Device Bus PLD: Other Registers
Katana
®
752i User’s Manual 10006024-04
6-6
OTHER REGISTERS
The IPMI Port Select register at hex location F820,E000
16
allows access to the IPMI inter-
face, as follows.
Register 6-12: IPMI Port Select
PORT_SEL: IPMI Port Selection:
Allow processor access to the IPMI controller and temperature sensors
1=Disabled (default)
0=Enabled
The LED register at hex location F820,D000
16
allows software to access the programmable
LEDs (on the Katana
®
752i front panel), as follows.
Register 6-13: Programmable LED
LED1—LED4: Programmable LEDs:
Illuminate the corresponding LED
1=on
0=off (default)
7 6543210
PORT_SEL Reserved
76543210
Reserved LED4 LED3 LED2 LED1