Filter
Top Products
Be careful of the cable alignment for the CN1 connector cable and earth cables. Align those
cables as shown in the following figure. If these cables is not aligned properly, the CSF gear
cover cannot be assembled properly.
Use the following figure to assemble the 13 gears onto the right CSF frame.
Right CSF Frame
Connector CN1
Connector CN2
Figure 3-41 Cable Alignment
Gear
(15.5mm)
Paper Eject
Transmission
Gear A
Gears
(10 mm)
CSF Planetary Lever
Sub Assembly
Gear (29 mm)
Driven Transmission Gear
Gear (30 mm)
Combination Gear (20mm/33.5mm)
Paper Eject DrivenTransmission Gear
Combination Gear( 8.5mm/33mm)
CSF Planetary.
Lever Assembly
Gear (18mm)
Gear (15mm)
Figure 3-42 Engaging 13 Gears
FX-2170 Service Manual Disassembly and Assembly
Rev.A 3-27