Filter
Top Products
2. Remove the right sub frame from the right frame assembly.
3. Remove the following 11 parts from the right frame assembly.
2 compression springs (200 g) 2 plain washers 1 spur gear (27 mm)
2 spur gears (34.5 mm) 1 spur gear (34 mm) 1 spur gear (21 mm)
1 combination gear (8 mm, 31.5 mm) 1 intermittent gear
Adjust the bidirectional print alignment. Refer to Chapter 4.
Mount the 11 parts above on the right frame assembly, as shown in the following figures.
Spur Gear
(21 mm)
Super Gear
(34.5 mm)
Spur Gear (34.5mm)
Spur Gear (34mm)
Combination Gear
(8mm/ 31.5mm)
Spur Gear (27mm)
Intermittent Gear
Compression Spring (200g)
Plan Washer
Compression Spring (200g)
Plan Washer
Figure 3-23 Engaging Gears 1
FX-2170 Service Manual Disassembly and Assembly
Rev.A 3-17