Filter
Top Products
Figure 2-15. Push-Pull Tractor Feeding Using the Rear Entrance
As shown above in Figure 2-15, when you use the pull tractor with this printer, you must remove the paper
eject cover, which includes the paper tension roller, from the printer mechanism.
3. Bottom Entrance
Figure 2-16 shows the paper path for tractor feeding using the bottom entrance. The bottom entrance is used
only for pull tractor feed. When the bottom entrance is used, the front PE sensor detects when paper is out.
Figure. 2-16. Pull Tractor Feeding Using the Bottom Entrance
Down
FX-2170 Service Manual Operating Principles
Rev.A 2-13