Filter
Top Products
Printable area Figure 1-3 shows the printable area for cut sheets. The table
below defines the abbreviations used in the figure.
Table 1-10 Printable Area for Cut Sheets
Abbreviations Single Sheet Multipart
PW (width) Refer to Table 1-8. Refer to Table 1-9.
PL (length) Refer to Table 1-8. Refer to Table 1-9.
LM (left margin) 3 mm (0.12") or more
(PW ≤ 364 mm (14.33"))
25 mm (0.98") or more
(PW = 420 mm (16.5"))
3 mm (0.12") or more
(PW ≤ 364 mm (14.33"))
25 mm (0.98") or more
(PW = 420 mm (16.5"))
RM (right margin) 3 mm or more
(PW ≤ 364 mm (14.33"))
25 mm (0.98") or more
(PW = 420 mm (16.5"))
3 mm or more
(PW ≤ 364 mm (14.33"))
25 mm (0.98") or more
(PW = 420 mm (16.5"))
TM (top margin) 4.2 mm (0.17") or more 4.2 mm (0.17") or more
BM (bottom margin) 4.2 mm (0.17") or more 4.2 mm (0.17") or more
BM
TM
PL
PW
RM
LM
Printable area
Figure 1-3 Printable Area for Cut Sheets
FX-2170 Service Manual Product Description
Rev.A 1-9