Filter
Top Products
• Printer status The front PE sensor detects that paper is loaded in the front paper path.
The release lever is set to continuous paper
Table 1-36 Paper Handling Sequence 3
Occurrence Result
button pressed
Printer goes off or on line.
button pressed
Printer performs a line feed.
button held down continuously
The printer performs a form feed after the line
feed
.
button pressed
Paper is ejected to the front paper park position
button pressed and the paper was
advanced to skip area
Paper is advanced to the next TOF position.
↑ button pressed
The printer micro feeds paper forward.
↓ button pressed
The printer micro feeds paper backward.
Release lever was set to Friction
The beeper sounds.
Front paper end sensor detects that paper was
loaded in the rear paper path.
The beeper sounds.
• Printer status Printer is on line ( not in the pause state).
No PE sensor detects that paper is loaded. ( The printer is set to CSF .)
The release lever is set to the Friction.
Table 1-37 Paper Handling Sequence 4
Occurrence Result
Print command sent
The paper is loaded from the CSF.
button pressed
Printer goes off line.
button pressed
Paper is loaded from the CSF.
button pressed
Paper is loaded from the CSF.
↑ button pressed
No operation.
↓ button pressed
No operation.
Release lever set to tractor position
The paper path is changed to tractor.
Rear/ Front paper end sensor detects that
paper is loaded in the rear or front paper path.
And, 3 seconds have passed.
The printer feeds paper.
Rear/ Front paper end sensor detects that
paper is loaded in the rear or front paper path.
And, , LF/FF, or button
was pressed.
Ignored.
Product Description FX-2170 Service Manual
1-26 Rev.A