Filter
Top Products
2. Rear Entrance
Figures 2-13, 2-14, and 2-15 show the paper paths for tractor feeding using the rear entrance. You can use the
rear entrance with any of the following paper feed methods: push tractor feed, pull tractor feed, or push-pull
tractor feed. When you use the rear entrance, the rear PE sensor detects when paper is out.
Figure. 2-13. Push Tractor Feeding Using the Rear Entrance
Figure. 2-14. Pull Tractor Feeding Using the Rear Entrance
As shown above in Figure 2-14, when you use the pull tractor in this printer, you must remove the paper eject
cover, which includes the paper tension roller, from the printer mechanism.
Down
Down
Operating Principles FX-2170 Service Manual
2-12 Rev.A