HP (Hewlett-Packard) 6208M-SX Switch User Manual


 
Configuring IP
Table 6.17: CLI Display of IP Traffic Statistics routing switch (Continued)
parameter The number of Parameter Problem messages sent or received by the
device.
source quench The number of Source Quench messages sent or received by the
device.
redirect The number of Redirect messages sent or received by the device.
echo The number of Echo messages sent or received by the device.
echo reply The number of Echo Reply messages sent or received by the device.
timestamp The number of Timestamp messages sent or received by the device.
timestamp reply The number of Timestamp Reply messages sent or received by the
device.
addr mask The number of Address Mask Request messages sent or received by
the device.
addr mask reply The number of Address Mask Replies messages sent or received by
the device.
irdp advertisement The number of ICMP Router Discovery Protocol (IRDP)
Advertisement messages sent or received by the device.
irdp solicitation The number of IRDP Solicitation messages sent or received by the
device.
This Field... Displays...
UDP statistics
received The number of UDP packets received by the device.
sent The number of UDP packets sent by the device.
no port The number of UDP packets dropped because the packet did not
contain a valid UDP port number.
input errors This information is used by HP customer support.
TCP statistics
The TCP statistics are derived from RFC 793, Transmission Control Protocol.
active opens The number of TCP connections opened by this device by sending a
TCP SYN to another device.
passive opens The number of TCP connections opened by this device in response to
connection requests (TCP SYNs) received from other devices.
failed attempts This information is used by HP customer support.
active resets The number of TCP connections this device reset by sending a TCP
RESET message to the device at the other end of the connection.
passive resets The number of TCP connections this device reset because the device
at the other end of the connection sent a TCP RESET message.
input errors This information is used by HP customer support.
in segments The number of TCP segments received by the device.
6 - 95