Filter
Top Products
Advanced Configuration and Management Guide
Table 10.10: BGP4 Network Information (Continued)
Atomic Whether network information in this route has been aggregated and
this aggregation has resulted in information loss.
Note: rmation loss under these circumstances is a normal part of
BGP4 and does not indicate an error.
Aggregation ID The router that originated this aggregator.
Aggregation AS The AS in which the network information was aggregated. This value
applies only to aggregated routes and is otherwise 0.
Originator The originator of the route in a route reflector environment.
Cluster List The route-reflector clusters through which this route has passed.
Status The route’s status, which can be one or more of the following:
• A – AGGREGATE. The route is an aggregate route for multiple
networks.
• B – BEST. BGP4 has determined that this is the optimal route to
the destination.
Note: he “b” is shown in lowercase, the software was not able
to install the route in the IP route table.
• b – NOT-INSTALLED-BEST. he routes received from the
neighbor are the best BGP4 routes to their destinations, but were
nonetheless not installed in the IP route table because the routing
switch received better routes from other sources (such as OSPF,
RIP, or static IP routes).
• C – CONFED_EBGP. The route was learned from a neighbor in
the same confederation and AS, but in a different sub-AS within
the confederation.
• D – DAMPED. is route has been dampened (by the route
dampening feature), and is currently unusable.
• H – HISTORY. Route dampening is configured for this route, and
the route has a history of flapping and is unreachable now.
• I – INTERNAL. he route was learned through BGP4.
• L – LOCAL. he route originated on this routing switch.
• M – MULTIPATH. BGP4 load sharing is enabled and this route
was selected as one of the best ones to the destination. he best
route among the multiple paths also is marked with “B”.
Note: If the “m” is shown in lowercase, the software was not able
to install the route in the IP route table.
• S – SUPPRESSED. This route was suppressed during
aggregation and thus is not advertised to neighbors.
Learned From The IP address of the neighbor from which the routing switch learned
the route.
Distance The administrative distance of the route.
This Field... Displays...
Info
If t
T
Th
T
T
T
10 - 108