Filter
Top Products
Advanced Configuration and Management Guide
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to AppleTalk in the tree view to expand the list of AppleTalk option links.
4. Click on the General
link to display the AppleTalk configuration panel.
5. Enter a new ZIP query interval from 1 – 1000 in the ZIP Query Interval field. For this example, enter 30.
6. Click the Apply button to apply the change to the device’s running-config file.
7. Select the Save
link at the bottom of the dialog, then select Yes when prompted to save the configuration
change to the startup-config file on the device’s flash memory.
Displaying AppleTalk Information
You can use the CLI or the Web management interface to display configuration information and statistics for
AppleTalk.
USING THE CLI
When using the CLI, you can access information about AppleTalk by entering the following show commands.
NOTE: For more details on these commands, see the Command Line Interface Reference.
• show appletalk arp cache: Displays the ARP table for the AppleTalk routing protocol.
• show appletalk forward cache:
Displays the forwarding table for the AppleTalk routing protocol.
• show appletalk routing table: Displays the global configuration parameters for the AppleTalk routing
protocol.
• show appletalk zone table:
Displays the network numbers and zones learned on the network.
• show appletalk interface: Displays the AppleTalk configuration for an individual interface or all interfaces.
• show appletalk interface zone: Displays the zones defined on all AppleTalk interfaces.
• show appletalk route: Displays the AppleTalk routing table.
• show appletalk traffic: Displays statistical information for RTMP, ZIP, AEP, DDP and AARP packets.
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-only or read-write access. The System
configuration dialog is displayed.
2. Click on the plus sign next to Monitor in the tree view to display the monitoring options.
3. Click on the plus sign next to AppleTalk in the tree view to expand the list of AppleTalk option links.
4. Select one of the following links:
• The ARP Cache
link
• The Forward Cache
link
• The Interface link
• The Interface Zone
link
• The Routing Table
link
• The Traffic link
• The Zone Table
link
15 - 20