Filter
Top Products
Configuring BGP4
Table 10.6: BGP4 Neighbor Information (Continued)
Time The amount of time this session has been in its current state.
KeepAlive The keep alive time, which specifies how often this router sends keep
alive messages to the neighbor. See “Changing the Keep Alive Time
and Hold Time” on page 10-23.
HoldTime The hold time, which specifies how many seconds the router will wait
for a KEEPALIVE or UPDATE message from a BGP4 neighbor before
deciding that the neighbor is dead. See “Changing the Keep Alive
Time and Hold Time” on page 10-23.
RefreshCapability Whether this routing switch has received confirmation from the
neighbor that the neighbor supports the dynamic refresh capability.
SendCommunity Whether this option is enabled for the neighbor.
NextHopSelf Whether this option is enabled for the neighbor.
DefaultOriginate Whether this option is enabled for the neighbor.
ReflectorClient Whether this option is enabled for the neighbor.
UpdateSource Whether this option is enabled for the neighbor and the value of the
option if enabled.
Message Sent The number of messages this router has sent to the neighbor. The
display shows statistics for the following message types:
• Open
• Update
• KeepAlive
• Notification
• Refresh-Req
Message Received The number of messages this router has received from the neighbor.
The message types are the same as for the Message Sent field.
This Field... Displays...
10 - 93