Filter
Top Products
Forward`vi
Receiving a Fax
How you receive a fax depends primarily on the
Receive Mode
setting (set either
through the HP OfficeJet LX Manager or through the front panel menus). Where you
receive a fax depends on the HP OfficeJet LX Manager's
OfficeJet Setup/Route
Received Faxes
setting.
The following table describes how to receive a fax for each Receive Mode setting.
Note:`
For more information on setting this mode, refer to chapter 2.
Receive Mode Setting How to Receive a Fax
Auto
No action is required.
Manual
When the HP OfficeJet LX rings, pick up the handset of the
telephone attached directly to the HP OfficeJet LX, listen for the
fax tone, press the
Start/Copy
button, then hang up the phone.
Notes:
1)
If you happen to be talking to the sender on a telephone attached
directly
to the HP OfficeJet LX, wait to hear the sender's fax tone,
then press the
Start/Copy
button. You can stay on the line while the
fax is being received. After the transmission is complete, you can
resume your telephone conversation.
2)
Make sure no documents are in the fax loading tray when you
are receiving a fax in Manual mode; they may be faxed to the sender.
Fax/TAM
No action is required, with the exception noted below.
Note:
If you happen to be talking to the sender on a telephone
attached
directly
to the HP OfficeJet LX, wait to hear the sender's fax
tones, then press the
Start/Copy
button. You can stay on the line
while the fax is being received. After the transmission is complete,
you can resume your telephone conversation.