Filter
Top Products
5`15
Making Reduced Copies
of Your Original Document
Refer to "Changing Copy Reduction" in chapter 2 to set the copy reduction using the
HP OfficeJet LX Manager or to chapter 6 to use the control panel menu.
Note:
When you have the resolution set to
Photo
and Copy Reduction to 100%, your
copies will actually be at 98% of the original size, which provides the highest
possible print quality.
Adjusting the Contrast
Refer to "Adjusting the Contrast" in chapter 2 to set the copy reduction using the
HP OfficeJet LX Manager or to chapter 6 to use the control panel menu.
Use this setting: For these kinds of fax originals:
Normal
Documents with acceptable lightness/darkness. This is the
factory setting.
Lighten
Originals that are too dark.
Darken
Originals that are too light.
Note:
You cannot make copies in Standard resolution. If the Resolution is set to
Standard
, your document will be copied in
Fine
mode, although the display will
not change to indicate this and the setting will not be changed on the control
panel. The
Standard
setting can only be applied to the resolution of outgoing
faxes.
5. Printing &
Copying